Update: Gear Review – Blue Desert SmarTube Hydration System – Inline System!

I did a gear review recently for the Blue Desert SmarTube Hydration System, that was very favourable.  I decided to go ahead  and order a second one to modify for use as my inline system for my upcoming Big SEKI Loop (which I have now dubbed the Big Sexy Loop 🙂 )

I measured the tubing so the portion in the bottle would fit in both my 1L Platypus and my 1L SmartWater bottle (used and recommended because it is super light and the shape fits very nicely in packs, as well as durability), all the way to the bottom.  I then left a small amount to go through the bottle cap thread connector, and made my cut there.

The tubing fit easily over my Sawyer Mini, on the “dirty” side, and then I shortened the tube so that the distance from the Sawyer Mini to my mouth was reasonable (it’s a bit too long to start).  The mouth piece side of the tube slid easily but firmly over the Sawyer Mini clean side.

The beauty of this set up, is the ease of just grabbing “dirty” water and continuing on. The suction through the Sawyer mini is perfectly fine and sipping water has no issues. Removing the hoses from the Sawyer Mini can be a tad challenging (I use the non sharp side of the knife to pry it down).  Fortunately, if you keep your water sources choosy, you shouldn’t need to back flush too often.

I have tried it now on a couple weekend hikes and day hikes with no issues. I will be taking this setup with me on a 10-14 day trip to really test it out.

Happy Hiking!

Advertisements

Gear Review – Blue Desert SmarTube Hydration System

This past weekend I was able to review the Blue Desert SmarTube Hydration System

This was a relatively inexpensive piece of gear that I think deserves a good review.   At only $23 CDN, and available on Amazon Prime, this is an easy way to add a hydration tube to your gear without dealing with a bladder.  I really like the fact that it comes with different attachments, a bite valve and a on off switch.   It is manufactured in Israel, and seems to be well made and didn’t have a funny taste.

The three different sized lids fit Nalgene bottles, and regular water bottles of different diameters.  A very simple setup where each lid ultimately stacks.   One thing I wish the kit included was a few inches of velcro material to secure it to your pack.  It works with my current ULA Circuit but it would be just a nice little bonus.

Here is what is included:

IMG_20170724_111454.jpg

Suction wasn’t too difficult and I found I stayed much more hydrated.   One thing I would like to try in the future is cutting the tube and hooking it up to my sawyer straw, and having it as an in-line filter.

IMG_20170723_131742.jpg

Happy Hiking!

Create a free website or blog at WordPress.com.

Up ↑